Tips for Sewing Sweater Knits

Sewing with Sweater Knits Cover Image
Sewing with sweater knits can be a little daunting if you haven’t much experience with them. Unlike other knits, they tend to do what they want, when they want to, and sometimes that doesn’t bode well when your aim is to cut and sew them up into a structured garment. Many of our patterns look great with a sweater knit, and we wanted to make sure to give you all some words of advice before you start! Hopefully these tips and tricks will alleviate any frustration you may encounter as a beginner.

Identifying Types of Sweater Knits

Let’s begin by identifying different types and attributes of sweater knits. Some are actually pretty darn easy to sew with and knowing what you’re dealing with is half of the battle. Sweater knits come in a variety of types, fibers, weaves, stretch orientations, weights and laundering requirements. When purchasing these online, it’s not always explicitly written what you will be getting and so much of the time sweater knits are sold in bundles with a bunch types combined. Don’t be afraid of these. Once you’ve got the right tools and a little bit of know-how,  you will have it down in no time!

Here is a list of common types of sweater knits found in the retail market:

  • French Terry
  • Hatchi / Hacci
  • Boucle
  • Ribbed
  • Slub
  • Burnout
  • Sweatshirt
  • Fleece
  • Crochet
  • Generically labeled “sweater knit”

Below are the descriptions you should be either looking for or measuring before beginning your project. Pairing the stretch, weave and weight of a fabric to the pattern you want to sew up with is key. Always ask yourself, will this fabric behave appropriately with the pattern you have chosen? If the pattern is intended to drape and slouch, a sweater knit with a high stretch and low recovery will work well. If the pattern is intended for a more structured knit, you’ll want to pick out a fabric with good recovery and potentially less stretch. Always read over a pattern to determine if the designer has laid out the best fabrics or stretch requirements for you to use. This will save you time and frustration.

Sweater Knit Pile DIBY Club

Sewing With Sweater Knits

  1. Weave – The weave of a knit refers to the way in which a textile (fabric) is constructed. In the world of sweater knits there are closed weave and open weave sweater knits. French terry is the outlier as it typically has a closed weave side and a side full of loose open loops. Open weave sweater knit can typically be seen through. This makes these fabrics best for garments like cardigans or big loose sweaters that you can wear a tank top or tee underneath of. Closed weave sweater knits are exactly the way they sound. You can’t see through them, they are weaved tightly together.
  2. Stretch – Stretch on any knit fabric can be either 2-way (horizontal – perpendicular to the selvage edge) or 4-way (horizontal and vertical- perpendicular and parallel to the selvage edge). Check out our printable Stretch Check printable to keep at your sewing desk. Open weave sweater knits typically have 4 – way stretch while closed weave sweater knits can vary. Always make sure to check your fabric stretch against a pattern’s requirements.
  3. Recovery – Recovery is the amount in which a fabric can bounce back after being stretched. If a fabric goes completely back to its original shape after being stretched it would be described as having “good recovery”. If a sweater knit, such as a loose weave, is stretched it typically won’t bounce all the way back to its original shape after being pulled on, until it goes through a wash and dry cycle. These knits tend to grow on you as you wear them, literally. With the right garment, that isn’t a bad thing!
  4. Material Fiber – Most sweater knits are made up of one or more of these fiber contents in combination with spandex: polyester, acrylic, wool, rayon and/or cotton.
  5. Weight / Thickness – The weight of a sweater knit can be a tricky thing to use as a gauge when purchasing online. Sweater knits are unique in that they can be very thick and at the same time be very lightweight.
  6. Laundering Requirement – I’ll be the first to admit, I rarely look at the laundering requirement. In our house, if it doesn’t survive the general wash cycle it just wasn’t meant to be. BUT, it really is important for the longevity of your garment. You put in all of the tough work, let’s take care of it. Try to look at the laundering requirements when purchasing and be sure not to allow your fabric to get caught on the center agitator pole in your washing machine during the cycle. If your sweater knit gets dramatically stretched out in the wash on this, the dryer likely won’t be able to revive it. Many OLD machines actually have a “KNIT” setting to reduce the agitation, if you’re worried a gentle cycle usually does the trick too.

During Garment Construction

Now that we know what we are working with, let’s get our machine settings set up. This article is going to share with you the settings that work on OUR machines. It’s important to know that every machine is different (even within the same brand/model) and your machine most likely will need slightly different settings. That said, these should be a decent starting point for you to work away from. Sewing sweater knit without taking the time to adjust your machine settings usually results in wavy seams (as pictured). The fabric gets stretched and pulled instead of gently feeding through a stitch. On that same note, make sure that you are simply supporting the fabric as it feeds through the machine; do not pull the fabrics as they feed through or you will get waving simply due to that.

Surging Waviness DIBY Club Sewing with Sweater Knits

But before we dig in too deep, be sure that you have washed and dried your sweater knit prior to cutting out your project. Sweater knits especially can shrink a fair amount. Hence why we have all had that super cute sweater knit top we just bought from the department store tossed into the donate pile after the first wash. On that note, be sure to take a look at the recommended care instructions for the fabric you are using. Many that say they are dry clean only, CAN be washed at home either by hand or in cold water and hung to dry.

Construction – Using a Serger

My preferred way to construct garments using sweater knit is to use a serger. This is for a couple of reasons. The first reason being that the serger seals the raw edges of the fabric as you sew. This means no fraying, no stitching over the project twice. If you sew a fair amount of your own clothes, a serger is definitely recommended. The second reason I prefer a serger to a sewing machine when constructing garments from sweater knit is the feed dogs on a serger seam to glide fabric through the stitch with much more fluidity. That said, a traditional sewing machine can do the trick to. Now, let’s talk about setting up your serger to sew sweater knit.

Pictured here are the settings that we use over at DIBY for our Brother 1034D Serger. These settings likely will not be the same settings that your machine will use. But this is a starting point to work off of. Grab yourself a scrap of fabric and let’s begin. The goal here is to achieve a nice flat seam, to eliminate any waviness that would occur from improper settings or manual pulling. When sewing with sweater knit, it’s very easy to develop these dreaded wavy seams. Don’t let this frighten you off! It’s pretty straight forward and after a couple of times adjusting it, you’ll know what settings you need for the next time.

When sewing with sweater knits you want to loosen up everything. This is so that the fabric, bulky or thin can glide through the stitch without getting stretched out by the presser foot, feed dogs or thread tensions. Sweater knits can be VERY stretchy and this makes them susceptible to stretching under the machine. Go down the line and make these setting adjustments to your machine.

  • Needle Type – Use a ballpoint or stretch needle to avoid damaging your knit
  • Needle Tensions – Lower medium tension to about a 3
  • Looper Tensions – Lower medium tension to about a 3
  • Presser Foot Pressure – Unscrew it pretty much all the way up
  • Differential Feed Speed – Slightly above 1
  • Stitch Width – Widen the stitch to accommodate how bulky sweater knit is
  • Stitch Length – lengthen your stitch to accommodate the stretch fabric

Test out settings on your scrap of fabric. Fold your scrap in half so that you have two layers to stitch though and feed the edge through the machine. If it's too loose of a stitch, tighten up the looper. If the presser foot isn’t allowing the fabric to feed through the machine as quickly as it’s stitching then adjust the differential feed. If the stitches are too close together and stretching the fabric, adjust the stitch length. This is all a test process and only takes 2 or 3 minutes to get perfected.

Sewing Machine Settings

Construction – Using a Sewing Machine

Using a traditional sewing machine to construct sweater knit garments can be slightly more difficult but is absolutely achievable. Grab your scrap of fabric, fold it in half and then adjust these settings on your machine at home.  Again, these settings are what works on OUR machine and your machine will be different. Use these at a starting point and make the appropriate adjustments as needed on a scrap.

  • Needle Type – Use a ballpoint or stretch needle to avoid damaging your knit.
  • Upper Tension / Needle Tension – This usually works best on a lower medium setting.
  • Presser Foot Pressure – This depending on how thick your sweater knit is. You want the presser foot to glide over the top of your layered fabric without tightly holding it down. Some machines are automatic and don’t allow for this adjustment to be made. In this case, if you can’t get the pressure just right, a walking foot can be very useful to keep everything moving through as it should.
  • Stitch Length – A longer stitch is suggested.
  • Stitch Type – Because you’re using a traditional machine you are going to need to make one stitch at the seam allowance (straight stitch or stretch stitch) and then another stitch (such as an overcast or zig zag) along the raw edges of the fabric seams to prevent your garment from unraveling.
  • Differential Feed Speed – This isn’t adjustable on all machines and I only suggest messing with this if the other settings don’t do the trick.

Coverstitch Settings DIBY Club Tutorial

While Topstitching

 Topstitching – Sewing Machine

Another point of potential frustration is when it comes to topstitching or hemming on sweater knit. For a sewing machine, use the same settings that you had set up for construction and carry on with a simple straight stitch. Some people prefer to use fusible hem tape or other additives to achieve a crisp hemline. Personally, it’s not recommended by us because you want to retain the natural drape of the fabric. The easiest way to hem sweater knit is to choose a banded option on a pattern or to double fold the hemline and stitch in place using a long straight stitch or a stretch stitch. Give it a good steam at the end (being sure to use the appropriate heat setting for the fiber content of the fabric).

Topstitching – Coverstitch Machine

Topstitching on a coverstitch machine is a breeze in comparison. If you haven’t added one of these babies to your wish list already, be sure to add one now. Topstitching and hemming with a coverstitch machine allows you to achieve a stretchy finish while at the same time finishing the raw edges of your fabric with the looper side of the stitch. If you do have a coverstitch machine, start by using these settings pictured here and making small adjustments until your scrap fabric comes out just right.

  • Needle Type – Ballpoint or Stretch Needles. Be sure to use the same size needle across the board.
  • Needle Tension – Start low at about a 3.
  • Looper Tension – Set this bad boy to zero. We do this for all knits. This will prevent tunneling.
  • Differential Feed – Raise this slightly above 1.
  • Stitch Length – Lengthen this to a 4.
  • Presser Foot Pressure – Unscrew this almost all the way up to prevent the fabric from stretching under the foot.

Clear Elastic for Sweater Knts DIBY Club Tutorial

Other Tips to Note

Using stretchy sweater knit leaves the seams open to stretching or growing throughout the day. To prevent the neckline or shoulders from growing on you, layer some 1/4″ clear elastic in those seams during construction. Easy peasy!

There is one last thing that I want to note. If you went through all the steps and you STILL have minor waviness going on, DO NOT STRESS. Typically a steaming iron or a wear and wash cycle or two will resolve this and the seams will settle into being flat. So go forth, buy all the sweater knits this season!

Want to try out a knit sweater pattern? Try the Adrianne Open Side Slouchy Sweater

-- Originally written by Kelly Bailey. Archived by Holly Hetzner. 

Back to blog

2 comments

Thank you this information was much needed. I havent sewn for about 20 years so much was forgotten. A great article to know where to start.

Mary Kiland

Thank you this information was much needed. I havent sewn for about 20 years so much was forgotten. A great article to know where to start.

Mary Kiland

Leave a comment

Please note, comments need to be approved before they are published.